Different Types of Elevators for Residential and Commercial Buildings

Introduction

Picking an elevator type is one of the first lift decisions in any building project, and it is often made too late. By the time the structural drawings are frozen, the shaft size, pit depth and overhead height have already ruled out half the options. A builder who wanted a quiet machine-room-less lift ends up with a machine room on the terrace because nobody checked early enough.

This guide lays out the main elevator types used in Indian homes, apartments, offices, hospitals and factories. You will find the types grouped by drive mechanism, then by building use, followed by a short selection checklist and answers to common questions.

How Elevators Are Classified

Elevators are usually classified in two ways. The first is by drive mechanism, meaning how the car is actually moved up and down. The second is by application, meaning who or what the lift is built to carry.

The two overlap. A hospital elevator can be a traction lift or a hydraulic lift. A home elevator can be MRL, hydraulic or pneumatic. So it helps to understand both groupings before you talk to a manufacturer.

Types of Elevators by Drive Mechanism

Traction Elevators

A traction elevator moves the car using steel ropes or belts running over a sheave connected to a motor. A counterweight balances the car, so the motor only lifts the difference between the car load and the counterweight.

  • Geared traction: A gearbox sits between the motor and the sheave. Common in mid-rise buildings with moderate speeds.
  • Gearless traction: The sheave is attached directly to the motor. It runs smoother and suits higher speeds and taller buildings.

Because of the counterweight, traction lifts use noticeably less energy than lifts that push the full load every trip. That is why they dominate apartments, offices and towers.

Machine-Room-Less (MRL) Elevators

An MRL elevator is a traction lift where the compact gearless machine and controller sit inside the shaft, usually at the top. There is no separate machine room on the roof.

  • Saves terrace space and construction cost of a machine room
  • Uses permanent-magnet gearless motors that are compact and efficient
  • Works well for buildings up to roughly 20 floors in most product ranges

MRL lifts have become the default choice for new residential towers and mid-size commercial buildings. They suit sites where height restrictions or roof usage make a machine room difficult.

Hydraulic Elevators

A hydraulic elevator lifts the car with a piston pushed by pressurised oil. A pump unit and oil tank sit near the shaft, often at the lowest level.

  • Holed (in-ground): The cylinder is set into a drilled hole below the pit.
  • Holeless: Telescopic jacks stand inside the shaft, so no drilling is needed.
  • Roped hydraulic: A jack combined with ropes gives more travel from a shorter cylinder.

Hydraulic lifts handle heavy loads well and need no overhead machine space. The trade-off is speed and travel height. They are generally used for up to five or six stops.

Pneumatic Vacuum Elevators

A pneumatic elevator moves a lightweight cylindrical car inside a sealed tube by changing the air pressure above it. It needs no pit and no machine room.

  • Installs on a finished floor with minimal civil work
  • Limited to small capacities, usually one to three people
  • Mostly used in existing bungalows and duplexes

Types of Residential Elevators

Home and Villa Elevators

Home elevators are built for independent houses, villas and duplexes. They carry fewer people, travel shorter distances and run at lower speeds. Typical capacities range from two to six persons.

Most home lifts in India today are MRL traction or hydraulic units. Owners usually care most about compact footprint, quiet operation, low power draw and finishes that suit the interior.

Apartment Passenger Elevators

Apartment buildings need lifts that handle morning and evening peaks without long waits. Car sizes of 6 to 13 passengers are common, with automatic doors and speeds that match the number of floors.

In buildings above a certain height, the National Building Code also asks for a fire lift and, often, a stretcher-size car. These requirements should be locked in during planning.

Platform and Wheelchair Lifts

Platform lifts carry a wheelchair user between a few levels at low speed. They often have a partial enclosure and need very little pit depth. They are common in bungalows with plinth level changes and in small clinics.

Types of Commercial Elevators

Passenger Elevators

Passenger elevators are the most common lifts in offices, malls, hotels and schools. They come in a wide range of car sizes, speeds and interior finishes. Capacity is chosen based on peak traffic, not average traffic.

Hospital and Bed Elevators

Hospital elevators have deep cars sized to carry a patient bed or stretcher along with attendants. They run with smooth acceleration and accurate floor levelling so beds roll in and out without a bump. Stainless steel interiors make cleaning easier.

Service Elevators

Service elevators move staff, trolleys, linen and supplies in hotels, hospitals and offices. They keep back-of-house traffic away from guests and patients. Interiors are tougher and less decorative.

Freight and Goods Elevators

Goods lifts carry heavy loads in factories, warehouses and showrooms. Capacities range from 500 kg to several tonnes. Car floors, doors and guide rails are heavier, and hydraulic drives are common because they handle heavy loads with low headroom.

Capsule and Panoramic Elevators

Capsule lifts have glass walls on one or more sides. They are installed in atriums, malls, hotels and showpiece offices where the ride itself is part of the experience. They need careful planning for the glass shaft and sun exposure.

Dumbwaiters

A dumbwaiter is a small goods lift for food, files or laundry. It is not meant for people. Restaurants, hotels and hospitals use them to move small loads between floors quickly.

Elevators by Building Height

A simple way to narrow down options is to look at how tall the building is.

Building height Common elevator types
Low-rise (2–5 floors) Hydraulic, MRL, pneumatic (homes)
Mid-rise (6–15 floors) MRL traction, geared traction
High-rise (15+ floors) Gearless traction, often with a machine room

These are general patterns, not hard rules. Site conditions, load and budget can shift the choice either way.

How to Choose the Right Elevator Type

Use this sequence when shortlisting:

  1. Define the load. People only, beds, or goods? This sets the car size and capacity.
  2. Count the stops and travel height. This narrows the drive type.
  3. Check available space. Shaft size, pit depth and overhead height rule out some options early.
  4. Estimate traffic. Peak usage decides the number of cars and speed.
  5. Consider running cost. Energy use and maintenance matter over a 20-year life.
  6. Plan for codes. Fire lift and accessibility requirements may apply.

A common pattern is owners fixing the shaft first and choosing the lift later. It works better the other way round. Pick the type, get the manufacturer’s layout drawing, then build the shaft to it.

Codes and Standards in India

Elevators in India are designed and installed under Indian Standards and state lift rules. The key references include:

  • IS 14665 series for electric traction lifts
  • IS 17900 for safety rules on construction and installation of lifts
  • National Building Code 2016, Part 8, covering lifts in buildings, including fire lifts
  • State Lift Acts and Rules, such as the Gujarat Lifts and Escalators Act, which require a licence before use

A good manufacturer handles drawings and documents for approvals. Ask about this before you sign.

FAQs

Which elevator type is best for a home?

For most Indian homes, an MRL traction lift or a compact hydraulic lift works well. MRL lifts save power and need no machine room. Hydraulic lifts suit sites with low overhead height.

Which elevator is most energy-efficient?

Gearless MRL traction lifts are generally the most energy-efficient. The counterweight reduces motor work, and modern drives with VVVF control cut power draw further.

Can a hydraulic lift be used in a commercial building?

Yes. Hydraulic lifts are common in low-rise commercial buildings, showrooms and factories, especially where heavy goods need to be moved over a few floors.

Is a capsule lift only for decoration?

No. A capsule lift works as a normal passenger lift with glass walls. It carries the same safety features. The glass simply adds visibility and visual appeal.

How long do elevators usually last?

With regular maintenance, most elevators run well for 20 to 25 years. Controllers and door operators are often upgraded earlier to improve performance.

Conclusion

The right elevator type depends on load, travel height, space and running cost, in that order. Traction and MRL lifts suit most apartments and offices. Hydraulic lifts handle heavy loads over short travel. Specialised cars serve hospitals, warehouses and showpiece spaces. Fix the type first, then design the shaft around it.

If you are planning a building now, share your floor count and use with a lift engineer before the structure is finalised.

About Express Elevators

Express Elevators & Infrastructures Pvt. Ltd. has designed, manufactured and installed elevators from Rajkot for over 30 years. The range covers passenger lifts with manual and automatic doors, MRL elevators, hydraulic elevators, hospital elevators, home elevators and capsule lifts, backed by installation and on-demand service.

We build lifts for smooth, quiet rides and multi-level safety, made to the standards your building needs.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top